Dynomotion

Group: DynoMotion Message: 14363 From: tapiolarikka Date: 1/23/2017
Subject: Recovering settings from KFlop

Hi Tom,


Trying to upgrade to Ver 434 corrupted my Win7SP1-X64 installation, or at least

I started getting BSOD with driver issue log.


Is there a way to recover the settings / Servo tuning values from KFlop?


Rgds,


Tapio
Group: DynoMotion Message: 14366 From: Tom Kerekes Date: 1/23/2017
Subject: Re: Recovering settings from KFlop
Hi Tapio,

It's not likely the KFLOP settings have anything to do with Windows crashing.   KFLOP doesn't normally save any settings. Any parameter settings are made by your initialization C Program. 

Is the Windows USB Driver loaded and functional?

Windows has a Restore Point feature that might be useful. 

Regards
TK

On Jan 23, 2017, at 6:14 AM, tapio.larikka@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

Hi Tom,


Trying to upgrade to Ver 434 corrupted my Win7SP1-X64 installation, or at least

I started getting BSOD with driver issue log.


Is there a way to recover the settings / Servo tuning values from KFlop?


Rgds,


Tapio
Group: DynoMotion Message: 14368 From: tapiolarikka Date: 1/23/2017
Subject: Re: Recovering settings from KFlop
Hi Tom,

I don't think it was the kflop settings. Most likely unsuccesfull install of the .net 4.6.2.

Windows could not find restore point.

So last loaded ini values cannot be read back?

Well then I'll be retuning since my ini file had no backup outside this system

Rgds,
Tapio